- Safety Features: Integrated with Line Insulation Monitor (LIM), Current and Voltage Monitors, and protections against overcurrent and overvoltage.
- Input Compatibility: Accepts Input 220-240Vac 50hz/60hz (110Vac on request)
- Power Output: Equipped with STEP-UP Switching Power Supply with an output of 600Vdc @ 3A (1800W).
- Design Efficiency: Housed within a compact 3 Rack unit box, maximizing portability and space efficiency.
- Connectivity: Features integrated Fathom-x with USB B connector and a reliable 7-pin surface tether connector.
BlueROV2 Power Supply System
Starting from: €8500.00
SubseaLED proudly introduces the BlueROV2 Power Supply System.
With a rated capacity of 1500W (up to 107A at 14Vdc), the SubseaLED BR2 Power Supply System will enable the use of the BlueROV2 at his max capability. It’s like having a battery always fully charged.
Product Description
SPSU
Tether
- Surface End: Equipped with a durable 7-pin connector.
- Tether Characteristics: Features 8.8 mm diameter, neutral buoyancy in saltwater, 80kg working load, construction with Aramide fibers, low bend radius (90mm), water block filler, two power conductors, a STP for data transmission, ground and CP reference.
- Subsea End: Incorporates an Aramide puller, 3-pin MCIL3 BIRNS Aquamate data connector, and a 3-pin PLA3F CRE Marine metal shell power connector.
VPSU
- Input Flexibility: Supports input range between 300 to 700 Vdc, enabling operations up to 450 meters with a copper tether and over 1000 meters with a fiber setup.
- Output Capability: Provides 14 Vdc at 107 Amps.
- Thermal Management: Developed with an advanced heat dissipation design.
- Mechanical Features: Weighs 2.4kg in air and 0.4kg submerged in Fresh Water, enclosed within the standard BR 3” 300mm enclosure and equipped with a BR pressure relief valve.
- Safety Mechanisms: Integrates overcurrent, under-voltage, over-voltage, short circuit, and thermal protection features.
Inside view of the VPSU.
Side view of the BlueROV2 after 30 minutes Wet Test at 100% Gain.
Product Description
SPSU
- Safety Features: Integrated with Line Insulation Monitor (LIM), Current and Voltage Monitors, and protections against overcurrent and overvoltage.
- Input Compatibility: Accepts a wide input voltage range (from 110 to 220 Vac) and is functional with both 50 and 60 Hz frequencies.
- Power Output: Equipped with STEP-UP Switching Power Supply with an output of 600Vdc @ 3A (1800W).
- Design Efficiency: Housed within a compact 3 Rack unit box, maximizing portability and space efficiency.
- Connectivity: Features integrated Fathom-x with USB B connector and a reliable 7-pin surface tether connector.
Tether
- Surface End: Equipped with a durable 7-pin connector.
- Subsea End: Incorporates an Aramide puller, 3-pin MCIL3 BIRNS Aquamate data connector, and a 3-pin PLA3F CRE Marine metal shell power connector.
- Tether Characteristics: Features 8.8 mm diameter, neutral buoyancy in saltwater, 80kg working load, construction with Aramide fibers, low bend radius (90mm), water block filler, two power conductors, a STP for data transmission, ground and CP reference.
VPSU
- Input Flexibility: Supports input range between 300 to 700 Vdc, enabling operations up to 450 meters with a copper tether and over 1000 meters with a fiber setup.
- Output Capability: Provides 14 Vdc at 107 Amps.
- Thermal Management: Developed with an advanced heat dissipation design.
- Mechanical Features: Weighs 2.4kg in air and 0.4kg submerged in Fresh Water, enclosed within the standard BR 3” 300mm enclosure and equipped with a BR pressure relief valve.
- Safety Mechanisms: Integrates overcurrent, under-voltage, over-voltage, short circuit, and thermal protection features.
Inside view of the VPSU.
Side view of the BlueROV2 after 30 minutes Wet Test at 100% Gain.
More Details
For those involved in underwater exploration, a reliable power source is essential.
Our meticulously crafted Surface Power Supply Unit comes equipped with a Line Insulation Monitor (LIM), providing an extra layer of protection against potential electrical leakage.
For detailed instructions, refer to our technical documentation or video links, and feel free to reach out for additional support—we’re here to ensure you’re back in the water smoothly.
The Specifications Table is here below.
| Surface Power Supply Unit | |
|---|---|
| Electrical Parameters | Values |
| Input Voltage | 220-240VAC 50/60Hz (90-120VAC on request) |
| Input Current (Max) | 16 |
| Input Power (Max) Watt | 2000 |
| Output Voltage VDC | 600 |
| Output Power (Max) Watt | 1800 |
| Output Current (Max) A | 3 |
| Line insulation Monitor (LIM) | Yes |
| Physical Parameters | Values |
| L x W x H | 56 x 58 x 21 |
| Mass | 12 kg |
| Operation Temperature | -5°C to +50°C |
| Umidity | 10-95% RH non-condensing |
| IP Rating | 20 |
For detailed instructions about the SSL BR002 Tether System, refer to our technical documentation or video links, or feel free to reach out for additional support, and learn more about:
- Surface End features
- Tether features
- Subsea End features
The Specifications Table is here below.
| SSL BR002 Tether System | |
|---|---|
| Electrical Parameters | Values |
| Voltage Rating (Power pair) | 1000 V |
| Voltage Rating (Telemetry pair) | 250 V |
| Physical Parameters | Values |
| Tether Diameter | 8,8 mm |
| Weight in air | 0,082 Kg/m |
| Weight in Freshwater | 2,2 Kg/100m |
| Weight in Saltwater | 2,0 Kg/100mg |
| Wire Gauge AWG - Power pair | 18 |
| Wire Gauge AWG - Comms pair | 24 |
| Wire Gauge AWG - Earth | 24 |
| Wire Gauge AWG - Spare single wire (proximity CP, etc…) | 26 |
| Working Strength | 80 Kgf |
| Breaking Strength | 320 Kgf |
| Minimum Working Bend Diameter | 90 mm |
For detailed instructions about the Vehicle Power Supply Unit, refer to our technical documentation or video links, or feel free to reach out for additional support, and learn more about VPSU:
– power trasmission
– voltage range and compatibility with BR2
– voltage fixed output
– voltage range and compatibility with BR2
– voltage fixed output
– weigh and mechanical features
– dimensions
– all the integrated safety measures
– dimensions
– all the integrated safety measures
and more.
The Specifications Table is here below.
| Vehicle Power Supply Unit | |
|---|---|
| Electrical Parameters | Values |
| Output Voltage (Nominal) VDC | 14 VDC |
| Output Current (Max) Ampere | 107 A |
| Output Power (Max) Watt | 1500 W |
| Subsea Power Connector | CRE PLA Metal Shell |
| Physical Parameters | Values |
| Weight in air | 2,4 kg |
| Weight in freshwater | 0,4 kg |
| Lenght | 324 mm |
| Outer Diameter | 3" Aluminum, 87 |
| Depth Rating | 950 m |
